Reese’s run and gun

Reese’s run and gun Just a kid gunsmith turning nothing into something

Here’s a more precision oriented r***r 10/22 that was done for a customer. It’s a tactical solutions receiver and green ...
09/13/2023

Here’s a more precision oriented r***r 10/22 that was done for a customer. It’s a tactical solutions receiver and green mountain outdoors bull barrel, sitting in a magpul rim fire stock and the upgraded r***r bx22 trigger.

I’m starting to shift directions in my career in some instances. I will still be doing a lot of the ridiculous “tactical...
08/26/2023

I’m starting to shift directions in my career in some instances. I will still be doing a lot of the ridiculous “tactical” builds, however I’m wanting to get into more of the precise, incredibly accurate, clean/simplistic, and much higher end side of fi****ms. And also enhance my skills on taking old beat up fi****ms and turning them into something completely different like the Marlin 336. Anyways beside all that here’s a girsan 1911 I did with an atlas tactical flat trigger shoe, and their perfect match ignition kit, vz grips, and a Chen SI flared magwell.

Here’s the next project I’m going to be working on, posting the before pictures now before I start it😂 got a lot of big ...
08/20/2023

Here’s the next project I’m going to be working on, posting the before pictures now before I start it😂 got a lot of big plans for this one so stay tuned!

This was the first Ar I ever did. Started as a cheap little bushmaster in 5.56. I had to sandblast 6 layers of paint off...
08/13/2023

This was the first Ar I ever did. Started as a cheap little bushmaster in 5.56. I had to sandblast 6 layers of paint off because of all the changes I’ve made over the years after I made the final decision of rubbed grey and bronze accents. Went with a geissele cold hammer forged 18” barrel, geissele gas block, geissele match 2 stage trigger, and geissele mk14 handguard. Fab defense core buttstock, ergo grip, shark break, and olight javelot weapon light.
Don’t make fun of the cvlife bipod either, works better than I ever thought it would

I went a little berserk on this one but it was very worth it. Started with a Lead Star Arms skeletonized upper and lower...
08/08/2023

I went a little berserk on this one but it was very worth it. Started with a Lead Star Arms skeletonized upper and lower receiver. Stuffed it with a Faxon Fi****ms 7.5” 300 blackout gunner barrel, Elftmann 3 gun trigger, aero precision stainless Bcg, and an all aero precision gas system. Used Dead Foot Arms LLC folder and modified cycle system but took the hinge pin out due to pistol brace laws. Also used a Strike Industries 10° grip, blade and a 45° canted liberty for subs. Lastly a strike industries handstop and olight gl pro.

Here’s the first handgun I ever did, this is kinda what started it and where I first got my feet wet. This one has went ...
08/05/2023

Here’s the first handgun I ever did, this is kinda what started it and where I first got my feet wet. This one has went through a lot of changes and I started with just the frame. After stippling I bought the stripped Strike Industries liteslide, along with their flared magwell. Went with a rival arms barrel and trybe defense compensator. Put a kraken on top and topped it all off with a post apocalyptic “mad max” style paint job using gunkote, with light blues, browns/coppers, and black

Gonna start playing around with photo editing a bit here too so stay tuned! Still got a lot more builds to post!
08/02/2023

Gonna start playing around with photo editing a bit here too so stay tuned! Still got a lot more builds to post!

8500+ people see my posts, don’t forget to like and follow!
07/27/2023

8500+ people see my posts, don’t forget to like and follow!

The Marlin 336 I posted is one of my favorites, this one IS my favorite. It started out as a used CZ 75 SP01 tactical. A...
07/24/2023

The Marlin 336 I posted is one of my favorites, this one IS my favorite. It started out as a used CZ 75 SP01 tactical. After I put a couple hundred rounds through it, I thought “this thing is incredible, how do I make it better?” I took the slide and using a Bridgeport manual mill, i milled a large port in the center, and milled out some weight reduction along side it. I also optic cut it for the Swampfox optics sentinel and matching Ironsides shield. I also ported the barrel and on a manual lathe I flush and crowned the barrel with a clean 11° crown. After the milling work was done the finish was destroyed from being in and out of a vice so I sandblasted everything and mirror polished it, and then distressed it with gunkote. Then threw some gorgeous walnut grips on, spiced the internals up with everything Cajun Gun Works, (which the race hammer is incredible) and last but not least a Tangent Arms flared magwell.

This is definitely one of my favorites. I still gotta get better with before pictures. I cut the barrel down 3.5" and th...
07/13/2023

This is definitely one of my favorites. I still gotta get better with before pictures. I cut the barrel down 3.5" and threaded it by hand just to see if I could do it. Used a handguard which was super light, arrowhead 1-10 and matching 30mm mounts, king comp, polished all internals, loading gate, stock, and trigger and topped it all off with gunkote

I really need to get better at taking before pictures but I found one on the internet so you get the idea, this 835 wa...
07/13/2023

I really need to get better at taking before pictures but I found one on the internet so you get the idea, this 835 was made in 1997 and passed down from my grandpa who probably harvested hundreds of birds with this shotgun. After he passed it down I took it upon myself to freshen it up a little as it had a lot of dings and scratches. I sanded the factory checkering down and stippled both the stock and fore end for some added grip, threw a liberty and Ironsides shield on it, polished all internals including the barrel and added a mcarbo spring kit to bring the trigger weight from a 5.7lb to a nice 3.2lb. I also sprayed it mossy oak bottomland with gunkote.
Then went out the following spring and harvested a bird of my own with it.

This one started it's life as a oemG***k 43× MOS made in Austria. I worked some magic after I got ahold of it, by millin...
07/13/2023

This one started it's life as a oem
G***k 43× MOS made in Austria. I worked some magic after I got ahold of it, by milling the factory slide out and putting 4 3/32" ports and doing some oddball weight reduction on a Bridgeport manual mill. I also flushed and did an 11° target crown on the barrel. Used Trigger shoe, Extended mag release, and extended slide lock. manual sentinel, cowitnessed by some aggressive arms suppressor height sights. An empire bf flared magwell, sprayed with gunkote, along with the slide that I sprayed a black multicam on with kg gunkote. Also cross armory pins and extended takedown pin to accent the barrel. Grip was also stippled by yours truly

Address

Warrenton, MO
63383

Telephone

+16363595568

Website

Alerts

Be the first to know and let us send you an email when Reese’s run and gun posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Reese’s run and gun:

Shortcuts

Share

Category