Aerial Endeavors

05/16/2021

Upgrading the original 3d printer to 3 colors, a step by step how to do the upgrade, what parts you need, and what connections to make. We like to share our knowledge with the world, considering there are no walkthroughs on how. Thanks for watching, and we hope you get something out of it.

05/16/2021

Our journey to upgrading our printer to 3 colors. This is a step by step how to. None like this on the internet. We are sharing our knowledge with the world.

03/28/2020

03/28/2020

So for the last 6 months, my drone has been giving me an error, gimbal motor overload. Several of my members happen to have the exact same drone I have, so I did some research and found the problem. This is an educational video designed to save you some money. That is if you run into the same problem. And if you do, at least you have a reference point to start the necessary steps to fix it. Unless of course you would rather send it to DJI and pay 200-400 dollars for the repair. The ribbon cable was 12$ on amazon and a little bit of my time. Saved a bunch of money.

11/28/2019

We do many different prints and designs. This is our watch holder.

09/30/2019

We have finished the gauge pods. And they are available.

07/06/2019

A young family at in the butterfly garden at nathaniel green park.

06/26/2019

We want to thank overture, for donating this silic print bed cover. Works on pla, abs, nylon, wood, and a host of other filiments.

05/29/2019