Cape UAV

Cape UAV Cape UAV captures stunning aerial photography, 6K video, and precision thermal imaging with top-tier enterprise drones.

Every mission is handled by fully insured, FAA Part 107–certified Remote Pilots for maximum professionalism and safety.

Rooftop HVAC units, exhaust fans, and mechanical assets are difficult: and often unsafe: to verify from ground level. De...
09/03/2026

Rooftop HVAC units, exhaust fans, and mechanical assets are difficult: and often unsafe: to verify from ground level. Deferred issues can lead to downtime, tenant complaints, and unexpected capital expenses.

As part of Cape UAV’s 2-week construction mapping sprint, we use enterprise-grade drones and sensors to document rooftop equipment across Cape Coral and SWFL.

Method:
• Up to 50MP visual imaging
• Repeatable GPS-guided flight paths
• FAA Part 107-certified Remote Pilots
• Fully Insured ($1M Liability)
• Thermal screening available on request, supported by Thermal Certified pilot Michael Sischo

Deliverables:
• Equipment-organized visual condition logs
• Rooftop asset maps
• High-resolution image sets
• Repeatable baseline datasets for tracking condition over time

Outcome:
Maintenance teams gain clearer priorities, stronger capital-planning data, fewer emergency repairs, and safer facility operations.

When included, thermal observations are screening indicators affected by capture and environmental conditions and do not independently confirm the source or severity of an issue. Advanced radiometric reporting with spot temperatures or area analysis is on-request and scope-dependent, only when explicitly specified in the Statement of Work. Documentation does not replace qualified mechanical/HVAC inspection or engineering evaluation.

Book a flight.

Construction payments require defensible proof: not just a folder of ground photos and a spreadsheet.For general contrac...
08/27/2026

Construction payments require defensible proof: not just a folder of ground photos and a spreadsheet.

For general contractors, developers, lenders, and project owners in Cape Coral and across SWFL, Cape UAV’s 2-week construction mapping sprint helps document completed phases, reported quantities, and site conditions for pay applications, lender draw inspections, and progress-payment reviews.

Method:
• Enterprise-grade drones and sensors with up to 50MP visual imaging
• Repeatable RTK/GPS-guided flight paths
• Phase-specific capture organized by area and tied to the current schedule of values
• FAA Part 107-certified Remote Pilots
• Fully Insured ($1M Liability)

Deliverables:
• Orthomosaic site maps
• Organized visual logs by construction phase and area
• Repeatable baseline datasets for month-over-month comparison
• Actionable documentation for coordination, review, and project records

Outcome:
Support faster payment approvals, reduce disputes, improve communication among lenders, GCs, and ownership, and strengthen project accountability with location-organized evidence.

Deliverables are for planning/documentation and not a substitute for a licensed land survey.

Book a flight.

Design discrepancies often start with outdated or disconnected site information.Cape UAV helps Cape Coral and Southwest ...
08/19/2026

Design discrepancies often start with outdated or disconnected site information.

Cape UAV helps Cape Coral and Southwest Florida construction and commercial teams integrate current aerial mapping data directly into GIS and CAD workflows.

Our process:
• Enterprise-grade sensors capture high-resolution site imagery and data
• Repeatable GPS flight paths support consistent progress documentation
• FAA Part 107-certified Remote Pilots collect and process the data safely
• GIS and CAD-ready deliverables streamline engineering and design review

The result: better workflow integration, fewer avoidable discrepancies, and faster access to current site information for planning, coordination, and documentation.

Every mission is Fully Insured ($1M Liability), with professional data collection built around your project requirements.

Book a flight to discuss your mapping workflow.

Deliverables are for planning/documentation and not a substitute for a licensed land survey.

When haul-road access and equipment staging are not clearly documented, congestion, delays, and avoidable safety risks c...
08/17/2026

When haul-road access and equipment staging are not clearly documented, congestion, delays, and avoidable safety risks can compound across a Cape Coral construction site.

Cape UAV captures high-resolution aerial data using enterprise drones and repeatable GPS flight paths. Our FAA Part 107-certified Remote Pilots document haul-road routes, access points, material movement areas, and equipment staging zones with consistent, repeatable coverage.

The deliverable can include an annotated orthomosaic and logistics-focused site map showing traffic flow, staging locations, and operational constraints for planning and coordination.

The outcome: smoother site logistics, reduced congestion, better equipment placement, and improved on-site safety across construction and land development projects in Cape Coral and throughout SWFL.

Fully Insured ($1M Liability)

Book a flight to plan your next site with clearer aerial data.

Deliverables are for planning/documentation and not a substitute for a licensed land survey.

Emergency access problems are often identified too late: after materials, equipment, or temporary facilities have restri...
08/16/2026

Emergency access problems are often identified too late: after materials, equipment, or temporary facilities have restricted critical routes on a construction site.

For Cape Coral and Southwest Florida project sites, Cape UAV creates high-resolution emergency access and site safety staging layout maps using enterprise drones and repeatable GPS flight paths.

Deliverables can clearly document:
• Emergency vehicle access routes and fire-lane clearances
• Turnaround areas and staging zones
• Worker muster points and equipment exclusion areas
• Current site conditions for coordination and documentation

The result is a current, visual reference that supports safety compliance planning, improves emergency vehicle access coordination, and helps project teams identify risks before they become delays or hazards.

Missions are completed by FAA Part 107-certified Remote Pilots. Cape UAV is Fully Insured ($1M Liability) and serves construction and large project sites throughout SWFL.

Book a flight to document your site before the next phase of work.

Mapping deliverables are for planning/documentation and not a substitute for a licensed land survey.

Material loss, inventory bottlenecks, and double-ordering create avoidable costs on large-scale commercial builds.Cape U...
08/14/2026

Material loss, inventory bottlenecks, and double-ordering create avoidable costs on large-scale commercial builds.

Cape UAV provides industrial material laydown and lay-yard logistics mapping for construction teams across Cape Coral and SWFL. Using repeatable GPS-guided flight paths, we capture up to 50MP orthomosaic datasets that show current material locations, access routes, staging areas, and site conditions.

Deliverables include:
Up-to-date site logistics maps
Material staging overviews
Planning and documentation datasets

The result is clearer site coordination, more efficient workflow planning, and reduced overhead associated with misplaced or duplicated materials.

Missions are completed by FAA Part 107-certified Remote Pilots. Cape UAV is Fully Insured ($1M Liability).

Deliverables are for planning/documentation and not a substitute for a licensed land survey.

Book a flight for your SWFL construction project.

Monthly manual reports show where a project was. Weekly progress tracking shows how it is moving.For general contractors...
08/12/2026

Monthly manual reports show where a project was. Weekly progress tracking shows how it is moving.

For general contractors and civil developers in Cape Coral and across SWFL, recurring drone mapping creates a reliable project record with:

• High-resolution orthomosaic datasets captured on a consistent schedule
• Week-over-week visibility into sitework, roads, drainage, foundations, and staging
• A single source of truth for owners, project managers, subcontractors, and stakeholders
• Clear documentation to support coordination, reporting, and timely decisions

Instead of relying on scattered photos and delayed updates, teams can compare current conditions against prior weeks and identify changes before they become reporting gaps.

Cape UAV uses GPS-guided enterprise drones operated by FAA Part 107-certified Remote Pilots to deliver organized aerial data for planning and documentation.

Fully Insured ($1M Liability).

Deliverables are for planning/documentation and not a substitute for a licensed land survey.

Book a flight to establish a repeatable weekly progress-tracking workflow for your next SWFL project.

Hidden moisture intrusion and compromised seams can turn into major leaks when Southwest Florida’s wind and rain intensi...
08/12/2026

Hidden moisture intrusion and compromised seams can turn into major leaks when Southwest Florida’s wind and rain intensify. A pre-storm roof audit gives facility teams actionable information before damage escalates.

Cape UAV’s Commercial Roof Core & Seam Integrity Audits combine:
• Radiometric thermal sensors to identify temperature anomalies that may warrant further investigation
• High-resolution visual checks of roof membranes, cores, seams, penetrations, flashing, and rooftop equipment
• Inspection planning and reporting by Thermal Certified pilots
• Actionable thermal anomaly reports to support maintenance planning, qualified follow-up, and insurance documentation

Radiometric reporting is an on-request, scope-dependent deliverable available only when specified in the Statement of Work. Thermal patterns are not, by themselves, proof of moisture intrusion, roof failure, or a specific cause. Results depend on weather, roof materials, surface conditions, timing, and data quality; confirmation by a qualified roofing professional is recommended.

Serving Cape Coral and SWFL. Every mission is conducted by FAA Part 107-certified Remote Pilots. Fully Insured ($1M Liability).

Identify potential concerns before they become catastrophic leaks and strengthen your maintenance record before the next storm. Book a flight: (239) 899-0648 | [email protected]

Precision From Above. Insight Beyond Limits. Commercial Inspections | Drone Mapping | Thermal Imaging | SWFL

Water retention on a commercial roof can remain hidden after the surface appears dry.Thermal imaging helps facility mana...
08/10/2026

Water retention on a commercial roof can remain hidden after the surface appears dry.

Thermal imaging helps facility managers and contractors identify heat anomalies that may warrant closer evaluation: often without putting personnel on the roof.

Cape UAV provides:
• High-resolution visual and thermal roof documentation
• Enterprise thermal sensors, including radiometric capability when requested and specifically defined in the Statement of Work
• Clear anomaly locations to support maintenance planning, leak investigation, and contractor follow-up
• Decision-support reporting led by Michael Sischo, Thermal Certified

For facilities in Cape Coral and across SWFL, aerial data can help prioritize roof areas before small concerns become larger repair disruptions.

Every mission is conducted by an FAA Part 107-certified Remote Pilot and backed by Fully Insured ($1M Liability).

Book a flight to scope a commercial roof thermal inspection.

Thermal limitations: Thermal anomalies are indicators for further evaluation: not proof of moisture intrusion, damage, or a specific cause. Results depend on weather, roof materials, surface conditions, timing, sensor settings, and other project factors. Findings should be verified by qualified roofing professionals and, where appropriate, ground-truthed. Radiometric reporting, including spot temperature measurements or area analysis, is available only when requested and specified in the SOW.

Standing water and subgrade failure often begin with elevation problems that are difficult to see from the ground.Before...
08/10/2026

Standing water and subgrade failure often begin with elevation problems that are difficult to see from the ground.

Before drainage installation or continued excavation, Cape UAV helps Cape Coral and SWFL construction teams document site conditions using:

RTK-guided elevation mapping for detailed terrain data
High-resolution orthomosaics for a clear site overview
Digital Elevation Models (DEMs) and 2D mapping data for planning and documentation

These deliverables help identify potential low areas, drainage flow concerns, and inconsistencies across the excavation area: supporting better grading decisions and helping reduce costly rework, drainage problems, and compaction issues.

Missions are completed by FAA Part 107-certified Remote Pilots. Cape UAV is Fully Insured ($1M Liability).

Deliverables are for planning/documentation and not a substitute for a licensed land survey.

Book a flight or request a quote for your Cape Coral or SWFL construction project.

Precision From Above. Insight Beyond Limits. Commercial Inspections | Drone Mapping | Thermal Imaging | SWFL

Address

Service Area:
Sarasota, FL

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9am - 5pm

Telephone

+12398990648

Website

Alerts

Be the first to know and let us send you an email when Cape UAV posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Cape UAV:

Shortcuts

Share

Category