19/08/2019
Want to learn Electronics?
Let's get started with the simple and fun Electronics Lesson.
💡"Blinking LED Circuit"💡
📍The Blinking LED Circuit is like the electronics version of the "Hello World" program. It's a simple electronic circuit that gives you a visual clue if it works.
📍The picture showed an Engineering Student experiment with a basic components that you can build to blink or flash LEDs in our Engineering Lab, Level 8.
🔋 The circuit is built using transistors, resistors, capacitors and LEDs. Of course you will need a breadboard, wire jumpers, and a power source. Let's get it started!
1⃣ ADD THE TRANSISTORS - Add the PNP Transistors and the jumper wires to the emitter of each transistor.
2⃣ ADD THE CAPACITORS - Connect the capacitors to the circuit.
3⃣ ADD THE RESISTORS - Connect the resistors to the transistors.
4⃣ ADD THE LEDs - Add the resistors along with the LEDs.
5⃣ SUPPLY POWER & WATCH THE LEDs BLINK. (The video shows LED Blinking)
📍This practice helps students become comfortable with the fundamental commands before progressing to more difficult programs.
.MSU
