22/10/2026
One drone survey can produce several very different outputs. Which one do you need?
When people talk about drone mapping, they often group together a DTM, DSM, Orthomosaic and 3D model. Each shows a site in a different way and helps answer different questions. This example takes over 300 images, 750k referenced points of data and sub 2cm accuracy to give you different outputs depending on your requirements!
DTM - Digital Terrain Model
A DTM represents the ground surface, with buildings, trees and other objects filtered out where the data allows. It’s useful when you need to understand the shape of the land itself. Good fit for: civil engineers, groundworkers, planners, landowners and mining or quarry operators.
Typical uses: site design, drainage and slope assessment, earthworks planning, and cut-and-fill or volume calculations.
DSM - Digital Surface Model
A DSM captures the top surface, including buildings, vegetation and other visible features. It helps show what is on the site and how high it is.
Good fit for: construction teams, surveyors, asset managers, telecoms and renewable energy operators.
Typical uses: building and vegetation height checks, surface change monitoring, visibility studies and planning work around existing features.
Orthomosaic
An Orthomosaic combines many overlapping images into one large image corrected for camera angle and terrain distortion. Unlike a single aerial photograph, it can be used as a consistent-scale map for measuring and comparing features.
Good fit for: construction and infrastructure teams, local authorities, farmers, estate managers and surveyors.
Typical uses: site plans, progress records, measuring areas and distances, mapping access routes, and comparing site conditions over time.
3D Model
A 3D model brings the site to life as a textured, navigable representation. It can help people understand structures and site conditions without relying on a flat image alone.
Good fit for: developers, architects, engineers, facilities and asset managers, and clients who need to share site information with others.
Typical uses: visual inspections, design context, stakeholder presentations, asset records and reviewing site features from different viewpoints.
The best output depends on the decision you need to make. A DTM helps you focus on the ground; a DSM captures the visible surface; an Orthomosaic gives you a measurable map; and a 3D model helps you explore the site visually.
Drone data quality and measurement accuracy depend on the survey setup, ground control, conditions and processing. If you’re planning a project and aren’t sure which output would be most useful, get in touch and we can talk through the options.