Skaarhoj

Skaarhoj We provide universal, highly configurable and integrated controllers for the broadcasting industry.

16/06/2026

If you are a broadcast operator, you sit day after day in a dark control room making sure programmes reach millions of people who never give a second thought to how it happens. (Usually while being asked to do more with less.)

We think that makes you a superhero.

ITN has been producing live national news for ITV NewsITV-NEWS since 1955. Studio 3 is their newest control room in London, running on SKAARHOJ. Their team told us they could swap their entire vision mixer for a completely different brand and their operators would not even notice.

Every superhero needs the right gear. You can check out the full case study at https://www.skaarhoj.com/case-study/itn

09/06/2026

Control more of vMix without reaching for a mouse.

In this video, we demonstrate how a SKAARHOJ joystick can be used for layer positioning, PTZ camera control, and source navigation inside vMix.

A simple way to add tactile control to your production workflow and stay focused on the production instead of the interface.

▶️ Watch the full video on YouTube: https://youtu.be/XCEqnRQ3Isk

vMix

08/06/2026

We are excited to return to InfoComm 2026 and showcase our latest integrations, new workflows, and flexible control solutions.

Visit us at Booth N7734 to discover what is new at SKAARHOJ, explore powerful multi-brand workflows, and get hands-on with the latest integrations in action.

🎟️ Get free access to the show floor with guest code SKA904.

See you at InfoComm Show 2026.

02/06/2026

Take deeper control of your vMix workflow with SKAARHOJ.

In this video, we show how ColorFly and RCP Pro can control and shade vMix inputs including webcams, drone feeds, playback sources, and more from a single tactile controller.

Adjust iris, color, gamma, zoom, and playback directly from the panel while building a more flexible and centralized live production setup.

👉 Watch the full video here: https://youtu.be/escFTaxkE60

26/05/2026

Control your vMix routing workflows faster with SKAARHOJ Rack Pro One.

In this video, we show how you can manage vMix routing directly from a tactile hardware controller while also controlling a Blackmagic Smart Videohub from the same panel.

One controller. Multiple devices. Unified control.

Watch the full video here:
https://youtu.be/Y65bpe0kaDg

vMix

19/05/2026

In this video, we showcase advanced PTZ workflows with SKAARHOJ PTZ Extreme, including PTZ Trace, fast preset recall, ATEM tally integration, and universal control across Sony and Panasonic PTZ cameras.

Built for operators who want fast tactile control without slowing down the production.

Watch the full video here: https://youtu.be/7R9zdhxDCig

12/05/2026

In this video, we show how Companion Satellite connects SKAARHOJ panels with Companion to create more flexible and advanced broadcast workflows.

From Quick Bar setup and button mapping to tactile control with T-bars, joysticks, encoders, and custom layouts, this is Companion beyond traditional button grids.

Watch the full YouTube video here: https://youtu.be/Npuq5XEUvlQ

05/05/2026

Control Blackmagic ATEM switchers with TCP Link for ATEM.

TCP Link for ATEM converts TCP messages into the ATEM UDP protocol, making it easy to integrate ATEM switchers with systems like Crestron, Extron and AMX.

In this video we show how to configure TCP Link for ATEM, connect it to an ATEM switcher and start sending commands for automation and control.

Watch the video:
https://youtu.be/ErqizGPftuo

Blackmagic Design

28/04/2026

The SKAARHOJ ETH-GPI Link connects physical triggers to modern IP-based production workflows.

With the latest Link IO firmware, you can control GPIO via Raw Panel, send and receive TSL tally, trigger HTTP automation, connect to Blackmagic ATEM, and even build internal logic with toggles and timeouts.

Available in 8x8 and 16x16 versions.

▶ Watch the video:
https://youtu.be/U3I8PTcZ8Dw

23/04/2026

NAB 2026 was a great one.

Thanks to everyone who stopped by our booth, tried the gear, and shared your workflows with us. We really enjoyed the conversations and the energy around it all.

From Smart Tally to new integrations and hands on control across switching, PTZ and shading, it was great to show it all in action with you.

Safe travels home and see you next year.

NAB Show

Adresse

Rosenkæret 11c, Stuen
Gladsaxe
2860

Hvad er åbningstiderne?

Mandag 09:00 - 16:30
Tirsdag 09:00 - 16:30
Onsdag 09:00 - 16:30
Torsdag 09:00 - 16:30
Fredag 09:00 - 16:30

Internet side

Underretninger

Vær den første til at vide, og lad os sende dig en email, når Skaarhoj sender nyheder og tilbud. Din e-mail-adresse vil ikke blive brugt til andre formål, og du kan til enhver tid afmelde dig.

Kontakt Virksomheden

Send en besked til Skaarhoj:

Genveje

Del