FIBERSCOPE.net: Borescopes and Pipe Inspection Cameras

Name: FIBERSCOPE.net: Borescopes and Pipe Inspection Cameras
Address: 1-1599 Dugald Road, Winnipeg, MB, R2J0H3, CA
Telephone: 1.800.239.9934

Home
Canada
Winnipeg, MB
FIBERSCOPE.net: Borescopes and Pipe Inspection Cameras

Call Directions Website

Welcome to https://www.fiberscope.net/ page. Read our news about equipment for visual inspection, including borescopes, pipe cameras, fiberscopes

FIBERSCOPE™, operated by Strahl LLC (USA) and Medit Inc. (Canada), is a premier supplier of industrial equipment for remote visual inspections in non-destructive testing (NDT). We provide a diverse range of products, including video borescopes, snake cameras, pipe cameras, pipe inspection crawlers, and fiberscopes. With global shipping available, we are here to assist you. If you have any questions or inquiries, don’t hesitate to reach out to our knowledgeable tech specialists.

10/29/2026

The crawler can cope with the pipe. Can your CCTV truck get to the manhole?
Backyard easement.
Soft ground.
A ditch behind the property.
Underground parking.
A plant floor with no vehicle access.
Those aren't unusual inspection jobs by any means, but they are precisely the type of job where a truck-based setup can be the difficult part.

STORMER X was built for a different way of working.
Roll the crawler, reel, and control tablet to the inspection point, and take your municipal-grade mainline capability with you.

⚙️ 6"–80" pipe range
One platform for everything from smaller sewer mains through to large storm lines and culverts.

🔋 Tool-battery powered
Run the system from either of two configured DeWalt, Milwaukee, or other major-brand commercial tool batteries, or use AC power when it's installed in a vehicle.

🔎 10× optical zoom + electric camera lift
Centre the Full HD pan & tilt camera in the larger pipe and inspect the remote defects without having to actually move the crawler up right up against them.

💧 Groundwater inflow detection
The built-in sensor enables I&I investigations by helping identify where groundwater is entering the line.

📏 Need measured reporting?
The advanced configuration incorporates laser measurements of diameter, ovality, and crack/object width.
And if your work expands later, STORMER X can also take a lateral launch module.
No dedicated CCTV truck is required for the system to function.

See STORMER X in action and talk to a pipeline specialist:
👉 https://www.fiberscope.net/stormer-x-pipe-crawler/

10/22/2026

Need a clear view above a ceiling, along a roofline, or under a vehicle?

COBRA is a one-operator pole inspection system with up to 23 ft of reach, dual forward and 90° side views, and a 9-inch live monitor. Record the inspection in MP4 video or JPEG images to support the next decision.

Tell us what you need to inspect, and FIBERSCOPE will help identify the right setup!

https://www.fiberscope.net/inspection-pole-camera-cobra

10/14/2026

Has a drain camera ever stopped just at the bend?

You're familiar with that situation—the pipe is right there, the fault is further along the line, yet your camera just won't turn the corner.

Which is why flexibility is just as important as image quality.

The MiniFlex 2 plumbing inspection camera is built with difficult runs in mind, such as tight P-traps, several 90° elbows, and small-diameter drain lines.

The flexible neck and the small 19.5 mm camera head allow inspectors to navigate plumbing arrangements that are difficult for standard push cameras.

You are able to find the camera head by using a compatible locator when it's time to locate the area of concern, since the device has a built-in 512 Hz sonde.

Certainly, each pipe is different since the diameter, the condition, and the bend geometry all influence how far you can go.

Which of the two causes you more difficulty at work—the tight bends or not getting enough push distance?

Take a closer look at MiniFlex 2:
https://www.fiberscope.net/plumbing-inspection-camera-miniflex/

10/01/2026

Need professional inspection equipment, but don’t love paying full price?

That’s exactly why our Clearance Collection is worth a look.

Instead of choosing a low-cost camera that may not have the reach, articulation, image quality, or durability your job requires, you can get selected professional inspection systems at reduced prices.

Current clearance equipment includes:

🔎 Video borescopes
🔄 Articulating borescopes
🚰 Drain and pipe cameras
📹 Fiberscopes
🛠️ Probes and accessories

Several systems are marked down significantly, with savings reaching into the thousands of dollars on selected models.

Same job to inspect.
Better tool for seeing the problem.
Much better price for getting it into your kit.

Clearance quantities are limited.

👉 See what’s available:
https://store.fiberscope.net/en-ca/collections/clearance

09/23/2026

You can see the stain. But can you see what is above it?
Before deciding what to open, inspect the space first.

The FIBERSCOPE COBRA pole camera reaches up to 23 ft. (7.2 m) and combines straight and 90° side views with 360° endless panning. Adjustable LEDs help illuminate dark areas, while the 9-inch monitor lets you view the inspection and record photos or video.

COBRA is a practical option for inspecting roofs, attics, suspended ceilings, gutters, manholes, and under-car areas.

Watch the video and request a quote for your application: https://www.fiberscope.net/inspection-pole-camera-cobra/

09/17/2026

What does operating an industrial borescope actually look like?
Take a hands-on tour of the VOYAGER C68HD. We walk through its joystick controller, touchscreen tools, photo and video capture, and saved-file review. You’ll also see the live camera image displayed on a larger monitor.
A practical look at the controls you’ll use to view, capture, and review your inspection.
Find out more:
https://www.fiberscope.net/industrial-video-borescope-voyager-c68hd/

09/09/2026

What could be hiding hundreds of feet down the pipeline?
The ANACONDA HD Pipe Camera gives inspection teams up to 394 ft (120 m) of working reach while maintaining control over what they see.
Choose a self-leveling camera for a stable forward view or a pan-and-tilt head when you need to examine pipe walls and surrounding areas.
Key capabilities include:
🔸 360° pan and 160° tilt
🔸 Adjustable LED lights
🔸 On-screen footage counter
🔸 Photo and video recording
🔸 Inspection of 2″–20″ pipelines
Watch the ANACONDA HD in action and explore the system:
https://www.fiberscope.net/sewer-camera-anaconda-ptw/

09/02/2026

What makes an inspection camera suitable for a hazardous environment?
It’s not just image quality, durability, or how far the camera can reach.
At refineries, chemical plants, oil and gas facilities, and other sites where flammable gases or vapours may be present, the inspection equipment itself has to be appropriate for the operating environment.
The next question is access.

For close-range inspection inside machinery and vessels, the VIDEOSCOPE XT provides an explosion-proof borescope option.
For pipelines from 2 to 24 inches, the SoloPRO+ ExZ1 ATEX Zone 1 push camera provides up to 330 ft (100 m) of working length.
For larger, longer pipelines, the Proteus ExZ1 robotic crawler enables operators to remotely inspect areas where a push camera may not be practical.
The right solution depends on the hazardous-area requirements, the asset, the access point, the pipe size, and the inspection distance.

See the available hazardous-location inspection systems:
https://www.fiberscope.net/hazardous-location-inspection/

08/27/2026

You found a defect inside a turbine, gearbox, pipe or heat exchanger. Now, how big is it?

The FIBERSCOPE iX3D 3D measurement video borescope lets inspectors move from finding an internal indication to measuring and verifying it without dismantling the component.

Its stereo cameras generate 3D surface data, while six measurement methods help evaluate distance, height, depth and area.

But the useful part isn't just getting a number.

With iX3D, you can rotate and zoom a 360° 3D model to check the position of measurement points. A color-coded depth map helps visualize surface geometry, and the software identifies areas where there isn't enough 3D data for measurement.

For different access conditions, iX3D offers:

✓ 0° forward-view and 90° side-view stereo probes
✓ 4 mm and 6 mm probe diameters
✓ Four-way articulation
✓ Working lengths from 1.5 to 7.5 m
✓ Six measurement methods
✓ Measurement results in less than one minute
✓ Rugged 10.1-inch touchscreen tablet for field use

iX3D is designed for demanding inspections of aircraft engines and turbines, helicopter gearboxes, pipelines, heat exchangers, wind and gas turbines, power-generation equipment and production facilities.

Learn more at FIBERSCOPE.net
https://www.fiberscope.net/ix3d-video-borescope-3d-measurement/

Address

1-1599 Dugald Road
Winnipeg, MB
R2J0H3

Telephone

1.800.239.9934

Website

https://www.fiberscope.net/, https://store.fiberscope.net/

Alerts

Be the first to know and let us send you an email when FIBERSCOPE.net: Borescopes and Pipe Inspection Cameras posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.