09/02/2026
DIY Cell Phone Camera Photo Scanning Box
1. Find a box that is about 9x11x6 (I used a Priority Mail Box)
2. If the box is white inside, move on to the next step. If white outside, pull apart at the glue seam, flip around so white is inside, and tape flap back where it was glued.
3. Tape long flaps to close off one side of box.
4. Cut approx 2x2 inch opening in the middle of one long side of the box.
5. Insert size guide into bottom of box (centered under 2x2 opening) and place on surface where open side faces a window with indirect sunlight and 2x2 opening is at top.
6. Place photo centered into size guide.
7. Check phone camera lens(es) and clean if necessary.
8. Open camera app on phone, and place where lens is pointed through 2x2 opening.
9. Zoom camera a bit (1.5-3x zoom is optimal), tap on screen to focus, and shoot photos.
10. Cropping and other necessary adjustments can be done in your phone.
*ADDITIONAL STEP if your photos have lots of black/dark and show too much reflection. You can either cover or color in the inside surface where the 2x2 opening is with black which will reduce the reflection on dark photos.