The Land Cruiser Garage

Website Contact the business

The Land Cruiser Garage The Landcruiser Garage – where Land Cruisers aren’t just vehicles, they’re a way of life!

We’re passionate about all things Toyota 4x4, from routine servicing and maintenance to repairs and keeping your pride and joy adventure-ready.

14/11/2026

More fuel, more miles, more fun 🤩

10/11/2026

Project Landcruiser 100: The Ultimate Comeback

~Landcrusier Amazon Restoration project part 3~With the chassis fully assembled, engine and gearbox dropped in, the stai...
08/11/2026

~Landcrusier Amazon Restoration project part 3~
With the chassis fully assembled, engine and gearbox dropped in, the stainless steel 3” exhaust installed, it was time to give a bit of attention to the body.
- cut and removed all the rusty parts
-treated the cavities
-welded new inner sills, welded inner arches.
- resprayed in epoxy primer and freshly painted full underbody.
With all this done, it was time to give attention to the interior:
- cleaned rusty joints, and applied sealant on the floor.
- pained the floor completely.
-applied soundproof insulation.
A bit of refresh for wiring.
The engine bay fully sprayed.
Next, we mate the body with the chassis and start connecting the pipes and wires.
That tuned for part 4 😎

06/11/2026

Just explaining another customer and comparing this rusty body with his Landcruiser’s but then I just realised, this could be yours too. Check all this weak points and if still in one piece, try and prevent this to happen. From experience, it might be a bit late but exceptions could be out there.

~Landcruiser Amazon restoration project - part 2 ~If you seen our reel with the chassis painted, well, it took a while t...
05/11/2026

~Landcruiser Amazon restoration project - part 2 ~
If you seen our reel with the chassis painted, well, it took a while to get there 😀
The chassis is a small part of it and the result of countless hours of welding, dissembling and general preparation.
Once the chassis was back from sandblasting, first thing we did is to prepare the general surface and apply epoxy primer ASAP. You don’t want the naked metal to meet the moisture in the air, it will make it rust in a matter of hours. We did the same for the body.
Secondly, once the epoxy primer is dry, we start dissembling everything, removing axles, arms, panhard rods, suspension parts and everything that can be in the way.
Then we clean every bit where sandblasting was not able to get and we finally paint over everything in epoxy primer.
2 coats at least will do it.
Last step, spraying over the chassis and everything underneath, with 2k black paint.
Here are some photos of starting to put back together the the new parts underneath, OME suspension conversion (AHC removed).
I must say this customer went over our expectations and bought everything new and OEM underneath.
We hope to make it better than Toyota factory did 😎
Stay tuned for part 3 where we start working on the body.

04/11/2026

Work in progress Landcruiser Amazon!

03/11/2026

゚viralシfypシ゚

~Landcruiser Amazon restoration project  Part 1~We are delighted to share one of our most time consuming projects so far...
03/11/2026

~Landcruiser Amazon restoration project Part 1~
We are delighted to share one of our most time consuming projects so far. Our customer Totyu Karabelov has brought us his pride and joy to bring it back to its glory.
As you can see from the photos, this poor Toyota has been no exception when it comes to rust, all the weak points were touched by rust and definitely it has seen better days.
But that’s why we are here, let’s bring this bad boy back to life.
What has beed done here:
-situation assessment
-body lifted from the chassis
-interior stripped over, including dashboard and wiring loom.
-removed all the parts from the cassis
-prepared for sandblasting
-transported and sandblasting done
-gearbox body valve upgrade
-engine refreshed
-bigger turbo installed
This has been a long and exhausting process so far but it is very rewarding when you see everything clean and ready for the next process.
Next will be fixing the chassis (welding) and spraying over the chassis including axles.
Stay tuned for detailed updates to follow.

03/11/2026

Because Toyota Power Wasn't Enough… M57 It Is

02/11/2026

The M57 that we had for while in the garage, finally started after some spot troubleshooting.
It is already in my personal Landcrusier 78 and running for months so far so good.

Address

Milton Keynes

Alerts

Be the first to know and let us send you an email when The Land Cruiser Garage posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to The Land Cruiser Garage:

Shortcuts

Share